Torque Boi Motor 22 TPA 25K

The Torque Boi is the big brother to the well-known Golden Boi Motor. The Torque Boi Motor is for the player who craves a more balanced build. Runs super smooth and has plenty of torque. Commonly used in many Milsim rifleman builds, as its recommended use is SSG 350-430 FPS  with .2 / DSG - Any FPS 

⁍ 22 TPA 25K

⁍ Super Fat Silver Brushes

⁍ 4 Bearings total - 2 in 1 Piece CNC Tower 

⁍ Steel Hardened D-Type Pinion Grub Screw Has ThreadLocker Applied  

⁍ N35SH Rated Magnets ( High Temp Rating ) 

⁍ CNC End-bell

⁍ Steel Shaft Spring

⁍ Vent cutouts on the can. This helps cool the motor faster and acts as a port to self-clean carbon dust and debris out of the armature. 

Every magnet indeed has a temperature rating. That temperature rating informs the user at what temperatures these magnets can perform before the torque starts to drop off. The maximum Temperature of operational efficiency is when a magnet begins to heat up, its magnetic field becomes weaker, the result is less torque, more amp draw, and less performance. 

If you, for some reason, down the line experience a drop off in performance... it is ONLY because your brushes are worn out and need replacement. 

Thats The Real Deal.

Applications are not limited to 18:1 / 16:1 / 13:1 / DSG / DMR SSS Builds 350-430 FPS - Any DSG Build.

More TPA equals more torque. If you are building a high FPS SSG build, odds are you are pulling a heavy spring. This motor would be the better choice when comparing the Golden Boi 2.0 and the Torque Boi in this situation. 

DSG - Which motor should you choose, Golden Boi 2.0 or the Torque Boi? The T.B. will produce less motor heat under the same stress, and will have a slower rate of fire by a few RPS or so. If you're chasing the rate of fire and want to break the 40 RPS, then you will want the Golden Boi 2.0 in that case.